Parameter | Range | Standard | Tolerance |
Thickness (mm) |
0.18 - 0.25 |
0.18, 0.20 |
+0.005/-0.01 |
Width (mm) |
50 - 1250 |
867, 762, 584 |
+2, -0 |
Length (mm) |
400 — 1000 |
- |
+2, -0 |
Diagonal difference for sheet (mm) | 2 max | - | - |
Coil sizes (mm) |
OD:
1450 max ID: 203, 250, 508 |
- | - |
Coil density (kg/mm) |
3.5 max |
- | - |
Offer for thickness and width outside the range may be quoted on specific request |
Typical value: < 2 per cent for >=0.18 mm thickness |
UTS(mpa) | ||||
---|---|---|---|---|
Alloy (AA) | Temper | Min | Max | %E (min) (50mm gauge length) |
3003 |
H14 | 125 | 170 | 1 |
3003 |
H16 |
165 |
205 |
1 |
3105 |
H14 |
150 |
200 |
1 |
8011 | O | 8.5 | 12 | 15 |
8011 | H14 | 125 | 170 | 1 |
8011 | H24 | 125 | 160 | 1 |
Alloy (%) | AA 3003 | AA 3105 | AA 8011 |
Zn |
0.10 |
0.25 |
0.10 |
Ti |
0.05 |
0.10 |
0.08 |
Cr |
0.05 |
0.10 |
0.05 |
Fe |
0.70 |
0.70 |
0.6 — 1.0 |
Si |
0.60 |
0.60 |
0.5 — 0.9 |
Mg |
0.05 |
0.20 — 0.80 |
0.05 |
Mn |
1.00 — 1.50 |
0.3 — 0.8 |
0.20 |
Cu |
0.05 — 0.20 |
0.30 |
0.10 |
Each (others) |
0.05 |
0.05 |
0.05 |
Total (others) |
0.15 |
0.15 |
0.15 |
Al |
Remainder |
Remainder |
Remainder |